Frigidaire Appliance Repair in Tampa, FL

We evaluate qualifying Frigidaire, Frigidaire Gallery, and Frigidaire Professional refrigerators, freezers, dishwashers, ranges, stoves, wall ovens, cooktops, built-in and over-the-range microwaves, washers, dryers, and laundry centers. Service fit depends on the complete model number, appliance type, installation, symptom, safe access, condition, and parts support.

Yes, qualifying Gallery and Professional series requests can be reviewed. The series name helps describe the product, but it is not enough to identify the technical revision. Send a clear photo of the complete model and serial label so the request can be matched to the correct refrigerator, dishwasher, cooking, or other product family.

Many Frigidaire top-freezer, side-by-side, French-door, and single-door refrigerator requests can be evaluated. A warm compartment can involve door sealing, airflow, frost buildup, fans, sensors, defrost, controls, compressor operation, ventilation, or the sealed system. Keep the doors closed as much as possible and protect temperature-sensitive food while service is arranged.

Qualifying icemaker and dispenser requests can be diagnosed by model. Helpful evidence includes which ice location is affected, whether cubes are small or jammed, whether water still dispenses, the filter age, any displayed message, supply-valve status, and signs of freezing or leaking. Those clues help separate supply, filter, valve, tubing, temperature, switch, sensor, icemaker, auger, wiring, and control paths.

Qualifying household upright and chest freezers can be reviewed for no-cool, frost, excessive run time, alarm, moisture, door, lid, fan, control, compressor, or sealed-system symptoms. Tell us the freezer style and temperature trend. Do not move a loaded chest freezer merely to find the model label; Frigidaire commonly places that tag on the left exterior wall above the access panel.

The exact model and displayed characters matter. Frigidaire identifies i20 as a drain-related condition on supported models, while displays may also show delay time, minutes remaining, rinse-aid level, a door-close reminder, or control lock. A message describes a state or system to investigate; it does not prove that a particular pump, sensor, hose, or control has failed.

Qualifying gas, electric, and induction cooking requests can be evaluated for ignition, burner, element, temperature, convection, fan, door, display, touch-control, power, and code symptoms. Stop using the appliance for a gas odor, smoke, arcing, overheating, or repeated breaker trip. Gas, high-voltage, induction, anti-tip, and hardwired conditions require appropriate safety precautions.

Yes, qualifying front-load and top-load washers, gas and electric dryers, and stacked laundry centers can be reviewed. Share whether the product is a separate stacked pair or a one-piece center, along with a full installation photo. Fill, drain, lid or door lock, spin, balance, heat, airflow, noise, vibration, and long-cycle complaints can involve the appliance, utilities, vent, drain, load, leveling, or installation.

Frigidaire’s official locator varies by product. Refrigerator labels are usually inside the fresh-food compartment, dishwasher labels on the interior door or right tub edge, front-load washer labels on the door trim, top-load washer labels under the lid at the back of the tub opening, dryer labels at the top of the door opening, and laundry-center labels on the dryer-door trim. Photograph the complete label.

First photograph the code or display and note the cycle, elapsed time, sounds, temperature, water location, and what happened immediately before the fault. Follow only the owner-guide reset or control steps for the exact model. Do not repeatedly reset an appliance that leaks, overheats, smells of gas or burning, arcs, trips a breaker, or vibrates violently, because resets can erase useful evidence or repeat an unsafe condition.

Same-day appointment options are often available, but they depend on request time, technician route, appliance and model, installation access, fault type, and parts availability. Call (813) 906-1062 with the complete model label, exact symptom, service address, and Tampa-area ZIP code to confirm the earliest suitable opening.

No. Max Appliance Repair Tampa is an independent appliance repair company and is not authorized by, affiliated with, or endorsed by Frigidaire or Electrolux. For an active manufacturer warranty, recall, safety notice, or factory-directed service request, contact Frigidaire or the retailer before arranging independent service.