Schedule Now & Get $25 Off
STOVE AND COOKTOP SERVICE • 7 DAYS A WEEK
Cooktop and Stove Repair Across Tampa Bay
Burner not lighting, element not heating or cooktop controls not responding? Max Appliance Repair diagnoses gas, electric, radiant and induction cooking-surface problems and have been helping Tampa homeowners for years.
- Same-day appointment options when available
- Gas, electric, radiant and induction cooktops
- Limited parts and labor warranty
Serving Tampa, Clearwater, St. Petersburg, Brandon, Riverview and nearby communities.
Fast Scheduling
Same-day cooktop and stove repair appointments are often available when you call early.
Surface-Focused Testing
We test the burner, element, ignition, control and power system tied to the symptom.
Clear Repair Decision
You receive the diagnosis and price before deciding whether to proceed.
Stove repair near you
Choose Your Service Area
Select the community closest to you for scheduling information. If your community is not shown, use the complete service-area guide or call with the full address.
Swipe to explore more locations →
Common Stove Problems We Fix
Cooking-surface faults can involve ignition, power delivery, temperature control, sensors or switches. These are common stove and cooktop calls we handle across Tampa Bay.
Gas Burner Will Not Light
Clicking without flame may involve a dirty port, wet igniter, burner cap, switch or spark module.
Electric Element Will Not Heat
A failed element, receptacle, switch, wiring connection or control can leave one zone cold.
Burner Heats Unevenly
Element damage, poor pan contact, burner alignment or control problems can create inconsistent heat.
Cooktop Will Not Turn On
Power supply, lock mode, touch controls, fuses or internal boards may interrupt operation.
Igniter Keeps Clicking
Moisture, debris, a misaligned cap, switch fault or spark-module problem can cause repeated clicking.
Induction Pan Is Not Detected
Cookware compatibility, sensor, power-board or control faults may stop an induction zone from activating.
Smell natural gas? Leave the area immediately, avoid switches or flames, call 911, then call Peoples Gas at 877-832-6747 from a safe location. Follow the Peoples Gas safety instructions.
Need Stove or Cooktop Repair Today?
Call with the fuel type, brand, model number and symptoms. We will confirm the earliest available appointment.
What to Expect From Your Service Visit
A simple process keeps the appointment focused and helps you make an informed repair decision.
1
Describe the Burner Problem
Tell us which cooking zone is affected, whether it is gas or electric and what the controls do.
2
We Test the Cooktop
The technician checks ignition, heating, switches, sensors, wiring and power connected to the failed zone.
3
You Choose the Next Step
We explain the diagnosis and repair price. Work begins only after you approve the option.
Stove and Cooktop Types We Service
This page focuses on the cooking surface and its controls. We service many configurations, including:
- Gas cooktops
- Electric coil cooktops
- Radiant glass cooktops
- Induction cooktops
- Downdraft cooktops
- Drop-in cooktops
- Built-in cooktops
- Modular cooktops
- Smart cooktops
- Selected commercial-style cooktops
Stove and Cooktop Brands We Repair
We provide independent service for many major brands, including GE, Whirlpool, KitchenAid, Bosch, Samsung, LG, Frigidaire and Miele.
See All Brands We ServiceIf the baking cavity is the main problem, check out how we fix your oven. If one freestanding appliance combines the cooktop and oven, take a look at our range restoration services.
What Common Stove Symptoms Can Mean
Similar burner symptoms can come from different ignition, electrical or control faults. A technician confirms power, gas ignition behavior and component operation before recommending parts.
Burner Clicks but Will Not Light
Common possibilities: Blocked port, wet igniter, misaligned cap, switch or spark-module fault.
What we check: Burner alignment, ignition spark, gas flow and switch operation.
One Electric Zone Is Cold
Common possibilities: Element, receptacle, infinite switch, wiring or control failure.
What we check: Element continuity, terminal condition, voltage and switch output.
Glass Top Stays Too Hot
Common possibilities: Stuck relay, sensor, switch or control-board problem.
What we check: Temperature response, relay state and control signals.
Induction Zone Shuts Off
Common possibilities: Cookware detection, cooling fan, sensor, board or power issue.
What we check: Pan compatibility, ventilation, stored codes and module operation.
Flame Is Weak or Uneven
Common possibilities: Blocked burner ports, cap alignment or gas-supply issue.
What we check: Burner cleanliness, flame pattern and supply condition.
Touch Controls Do Not Respond
Common possibilities: Control lock, moisture, touch panel, wiring or main-board fault.
What we check: Lock settings, surface condition, connections and control response.
Should You Repair or Replace the Stove or Cooktop?
A repair may make sense when the appliance fits the countertop, the surface is intact and the fault is limited to an igniter, element, switch or control. Replacement may be more practical when a glass surface is badly damaged, parts are unavailable or several zones have major failures.
We diagnose the issue and give you a quote so you can compare repair with replacement.
Info to Have Ready When Calling
- Brand, model and serial number
- Gas, electric or induction
- Which burner or zone is affected
- Any error code or clicking pattern
- Whether a breaker recently tripped
Stove Repair FAQs
How much does stove or cooktop repair cost in the Tampa Bay area?
Cost depends on the failed component, cooktop type, parts availability and labor required. After testing the appliance, we explain the fault and give you the repair price before work begins. The service-call fee is waived with a completed repair.
Do you repair gas, electric and induction cooktops?
Yes. We diagnose gas burners and ignition systems, electric coil and radiant elements, induction zones, switches, sensors, touch controls and related wiring on many major brands.
Why will my gas burner not light?
A dirty burner port, wet or cracked igniter, misaligned cap, failed switch or spark module can prevent ignition. If gas flows without lighting, turn the burner off and ventilate according to the manufacturer’s instructions.
Why is one electric burner not heating?
The element itself, its receptacle, wiring, infinite switch or electronic control may have failed. Testing continuity and voltage identifies whether the fault is at the surface or inside the control system.
Why does my induction cooktop not detect a pan?
The cookware may not be induction-compatible, too small or positioned incorrectly. If compatible pans fail on one or more zones, a sensor, coil, power module, fan or control may need diagnosis.
Can a cracked glass cooktop be replaced?
Often, but the replacement surface must match the exact model and can be a significant part of the repair cost. Stop using a cracked surface, especially if liquid could reach electrical parts below it.
What should I do if I smell gas near the stove?
Leave the area immediately and do not operate switches, phones or flames inside the building. From a safe location, call 911 and Peoples Gas at 877-832-6747. Review the official Peoples Gas instructions.
Get Your Stove or Cooktop Diagnosed
Serving Tampa Bay communities seven days a week. Call with the complete address or request an appointment online.